How To Repair A Scratch On Your Leather Sofa

Scuffs and scratches on leather motorcar seats and leather furniture are an all also mutual problem that tin leave an unsightly area of harm on an otherwise perfect piece of leather upholstery.

The skillful news is that using the guide and products shown on this page (all in i kit!), getting rid of scratches and scuffs on leather tin exist quick, easy and easy on the bank balance!

See the video guide above, and the step by stride guide below for details on leather scratch repair and leather scuff repair.

Products Required

Leather Repair Kit - To repair the harm to the leather

The leather seat shown to the left has suffered a nasty scuff/scratch, leaving an expanse of damage and colour loss.

Despite what is usually idea, this is a relatively easy problem to fix. With a few simple to use products (available in a higher place!) and the steps provided beneath, scuffs and scratches no longer demand to exist a nightmare!

Leather Scuff & Leather Scratch Repair Method

Footstep i. CLEAN THE Expanse

Every bit with all quality leather repairs and restorations, the first step is to ensure the surface area is complimentary from dirt and contaminants.

To exercise this, take the Leather Prep Pad and wipe the area down thoroughly.

Once clean, leave the area to dry out naturally for approximately five-10 minutes.

STEP 2. SAND ROUGH PATCHES

The scuff in the instance shown was quite crude to the touch, in situations where the damaged area is rough such every bit this, it is always best to sand the rough areas down.

Merely take some 1200 dust sandpaper (included in the kit) and gently sand the area until it feels smooth to the bear on. This ensures a more than professional terminate outcome.

STEP 3. Employ FILLER

In one case the rough areas have been removed, areas of loss to the leather should be filled for the best possible effect.

Take a pocket-size corporeality of Heavy Filler and smooth over the expanse of damage using the Spatula provided (Excess tin can merely be wiped away) and permit to dry out (this should take 25-thirty minutes naturally, this tin can exist quickened with a hairdryer.

Build the filler upwards in thin layers as required, using this procedure, until it is level with the surface of the leather. This may take one coat, or several, depending on the severity of the damage. It is always important to go out enough time for the filler to dry completely at this stage, failing to do so volition compromise the quality of the repair.

Pace 4. SAND FILLER LEVEL

One time the filler has dried sufficiently, the side by side pace is to sand the filler level with the surface of the leather.

Accept the 1200 dust sandpaper used previously and sand the applied filler to ensure that it sits completely level with the surface of the leather.

STEP v. APPLY COLOURANT

The kit contains a quantity of colourant (selected on ordering) and several tints, along with a colour matching guide. Take the standard colourant and tint as needed, post-obit the instructions, to get a perfect match for your leather. (Ever test on an inconspicuous surface area when colour matching, until you go the required colour.)

Once a suitable match has been accomplished, but apply a small amount of the matched colourant to the area being repaired, ensuring the entire area is covered. After application, dry with a hairdryer.

Use the same method of application and drying to apply as many thin coats as required to completely embrace the damage.

The Colourant in this Kit has congenital in sealers and so once applied the repair will becomes scuff and scratch resistant.

FINAL Result

As can be seen from the afterwards image provided to the left; with a couple of piece of cake to use products and a simple process, scuffs and scratches tin can be repaired quickly and with minimal cost.

Professional results are easy to achieve, even for a DIY novice! If you have a scuff or a scratch on your leather, purchase the products you lot need right here at a great price today!